Keeping a computer to pristine and outside is one of the best ways to ensure its operation at peak performance and performance. Insulating dust and impurities can leave heat unable to lose output heat by the hottest components, which in turn can lead to overheating, thermal choke and even system failures.
To make sure that this will not happen, making the dust built on the computer once a year, and its dust filters is an wise plan. Here’s how to do it effectively and safely.
What do you need to pristine the computer
Cleaning the computer is uncomplicated, but depending on the scope of dirt you may want to prepare several tools to really provide a deep computer.
- Microfiber fabrics
- A can of compressed air
- Screwdriver
- Delicate, long, tired of brush
- Stiff brush
- Distilled water or screen cleaning agent (not cleaning the glass)
- Opposite wrist belt (if you want to be very unthreatening)
- Make sure the computer is powered and disconnected before cleaning.
You perfectly want a enormous, clear desk surface to pristine a computer with pure lighting and ventilation. If you have an air filter or a purifier, there may not be a bad time to catch it or at least open the window. There will be some dust around. If you have a garage, this is an even better option.
It is best to perform any maintenance on a computer with an anti-static wrist band to avoid inert, but you can also ground periodically by touching the chassis or power supply. You should also avoid cleaning on the floor covering, but if you have no choice, at least avoid wearing socks on the rug.
How to pristine the interior of the computer
When cleaning the computer, it’s best to start with the interior. There is a good chance that the dust will swim around your room for a moment, so there is little cleaning outside if it becomes soiled again.
Take out all the panels from the computer and put them flat to give you a good view of them. If possible, remove all dust filters and thoroughly pristine them from dust. If they are particularly dusty, consider making this part outside or at least near the window. Use canned air to remove most of the dust, but if something is particularly stubborn, gently our brush will do the trick – make sure that it will not lead inert electricity.
If there are enormous, flat surfaces on the housing panels that are dusty, slightly suppress the microfiber cloth and wipe them thoroughly, and then leave them desiccated.
Find heat under the frosty processor or radiator and operate a can of compressed air to blow any dust hidden between the fins, making sure that it holds the fan blade so that it does not spin, because it can damage the engine. You can also operate a supple brush to gently pristine the condensate and fries on the motherboard. Use a microfiber cloth to wipe the fan blades and all other enormous, dusty surfaces.
Then locate the RAM memory and operate compressed air to pristine any dust from all over the gaps and between all the fins present on the spread. Use a supple brush to gently pristine between the sticks. Alternatively, remove each stick from their nest and wipe them with a microfiber cloth.
To value your graphics card, operate compressed air to pristine the dust from the fin and fan housings, but remember to keep the fan blades to prevent engine damage. Grate the back plate and all enormous dusty surfaces with a microfiber cloth.
Use a combination of compressed air and microfiber cloth to remove any dust from the power supply and interior of the computer housing. Wipe the blades and system fan housings.
Finally, before he put down the side panels again, spend some time to organize the cables. Cable bands and clips can lend a hand press the cables down and off the beaten track of the main body of the housing, which can improve the air flow, reducing overheating and noise, just like cleaning dust.
How to pristine the outer side of the computer
Thanks to the interior of the computer, you can wipe off any side panels or other outer surfaces with a damp cloth of the microfiber to remove most dust and residues. Pay special attention to any grills or filters that still show dust, and blow their compressed air or wipe them if they are stubborn.
Find all external ports at the front of the housing and give them a brief gust of compressed air to remove and dust and impurities that can inhibit connections. Do not forget to check the bottom, because the power supply has its own consumption, usually accompanied by dust filters that require removal and cleaning.
Computer cleaning: Frequently asked questions
How often should you pristine your computer?
Most people have not cleaned their computers for years, because they do not realize how critical it can be to keep their systems without dust. But as you give television or game monitor to make sure that the photo remains brilliant, it is worth ensuring that dust and dirt does not deteriorate the computer’s sensation than necessary.
If you can commit to pristine once a year, you are doing better than most, and this is a comfortable milestone that makes it easier to remember when it’s time to provide the system. If your home is particularly dusty, you may want to do a quick internal pristine once every six months to keep up.
Can you operate a computer cleaning vacuum cleaner?
NO. Vacuum cleaners are known for generating inert electricity, which can easily damage the sensitive internal components of the computer. There are electronic dust blowers that can act as an alternative to compressed air, but the whole grain vacuums are too unsafe to pristine the computer.
How do I know if my computer requires cleaning?
If over a year has passed since you cleaned it, it could probably do it with pure. However, you can consider cleanliness if the computer is particularly clamorous or tardy. This may indicate that the components are thermally chopping, which can be caused by clogged and soiled chains. You can also look at the computer, and if you notice that a lot of dust accumulates, it’s probably time to pull out the air in cans.
